Quantikine Immunoassay Control Group 10
R&D Systems | Catalog # QC41
Key Product Details
Applications
Product Summary for Quantikine Immunoassay Control Group 10
INTENDED USE & DESCRIPTION
For use as quantitative controls for the determination of cytokine concentrations in biological fluids. Concentrations have been assigned using R&D Systems’ Quantikine HS kits. Controls are prepared in diluted porcine serum with preservatives. They contain recombinant human cytokines at low, medium and high concentrations. Controls are supplied lyophilized.
STORAGE & STABILITY
Unreconstituted Controls should be stored at 2-8 °C and are stable for at least 6 months from date of receipt. Depending on the analyte of interest, reconstituted controls may be stable when stored at < -20 °C. Users should evaluate the frozen stability of the controls in their application or discard after use.
REAGENT PREPARATION
Reconstitute each vial with the volume of deionized or distilled water indicated in the chart in the product datasheet.
PROCEDURE & EXPECTED VALUES
Controls should be assayed in the same manner as unknown specimens. The acceptable ranges for the analytes in these controls are printed in the product datasheet. Due to possible variations in techniques and methodologies, it is recommended that each laboratory determine its own target range. Laboratories using other test systems should establish their own acceptable ranges as these assays may produce different values.
TECHNICAL HINTS & LIMITATIONS OF THE PROCEDURE
• The ranges were determined using R&D Systems’ Quantikine kits. If expected values are not obtained, verify that the lot numbers on the vials correspond with the lot numbers listed in the product datasheet and the correct volume of deionized or distilled water was used for reconstitution of the controls.
• The results obtained with these controls depend upon several factors associated with methods and instrumentation. Test systems other than those supplied by R&D Systems may result in values that differ from those printed on the product datasheet.
Formulation, Preparation, and Storage
Shipping
Storage
Product Documents for Quantikine Immunoassay Control Group 10
Certificate of Analysis
To download a Certificate of Analysis, please enter a lot or batch number in the search box below.
Note: Certificate of Analysis not available for kit components.
Product Specific Notices for Quantikine Immunoassay Control Group 10
For research use only
Citations for Quantikine Immunoassay Control Group 10
Powered by Bioz
Customer Reviews for Quantikine Immunoassay Control Group 10 (5)
Have you used Quantikine Immunoassay Control Group 10?
Submit a review and receive an Amazon gift card!
$25/€18/£15/$25CAN/¥2500 Yen for a review with an image
$10/€7/£6/$10CAN/¥1110 Yen for a review without an image
Submit a review
Customer Images
-
Verified Customer | Posted 12/02/2020Used for IL-12. QC Low in well 3A QC Med in well 12G QC High in well 12H
-
Verified Customer | Posted 12/02/2020This QC was used for the IL-12 assay and produced results in the given ranges, with only few high outliers. Low: A3 Medium: G12 High: H12
-
Verified Customer | Posted 04/03/2018
-
Verified Customer | Posted 05/03/2017
-
Verified Customer | Posted 04/24/2017
There are no reviews that match your criteria.