ABCG8 Antibody - BSA Free
Novus Biologicals | Catalog # NB400-117
Key Product Details
Species Reactivity
Validated:
Human, Mouse
Cited:
Human, Mouse
Applications
Validated:
Western Blot, Immunocytochemistry/ Immunofluorescence
Cited:
Western Blot
Label
Unconjugated
Antibody Source
Polyclonal Rabbit IgG
Format
BSA Free
Loading...
Product Specifications
Immunogen
A synthetic peptide from the N-terminal region of human ABCG8 protein. [UniProt# Q9H221]
Localization
Integral membrane protein; multi-pass membrane protein
Clonality
Polyclonal
Host
Rabbit
Isotype
IgG
Theoretical MW
70 kDa.
Disclaimer note: The observed molecular weight of the protein may vary from the listed predicted molecular weight due to post translational modifications, post translation cleavages, relative charges, and other experimental factors.
Disclaimer note: The observed molecular weight of the protein may vary from the listed predicted molecular weight due to post translational modifications, post translation cleavages, relative charges, and other experimental factors.
Scientific Data Images for ABCG8 Antibody - BSA Free
Western Blot: ABCG8 Antibody [NB400-117]
Western Blot: ABCG8 Antibody [NB400-117] - Total protein from Mouse small intestine was separated on a 7.5% gel by SDS-PAGE and transferred to PVDF membrane. The membrane was then probed with anti-ABCG8 antibody at 2 ug/ml and detected with an anti-rabbit HRP conjugated secondary antibody using chemiluminescence.Immunocytochemistry/ Immunofluorescence: ABCG8 Antibody [NB400-117]
Immunocytochemistry/Immunofluorescence: ABCG8 Antibody [NB400-117] - ABCG8 antibody was tested in HEK293 cells with DyLight 488 (green). Nuclei and alpha-tubulin were counterstained with DAPI (blue) and Dylight 550 (red).Applications for ABCG8 Antibody - BSA Free
Application
Recommended Usage
Immunocytochemistry/ Immunofluorescence
1:250
Western Blot
1:250-1:500
Application Notes
This ABCG8 antibody is useful for Immunocytochemistry/Immunofluorescence and Western Blot where a doublet is seen at ~67kDa and ~72kDa. Longer exposure times are needed to visualize the wild type ABCG8. For mouse, 100 ug protein (B6/129AKRFVB liver homogenate) loaded with antibody diluted at 1:500. In ICC/IF puncate membrane localization with some weak nuclear reactivity was observed in HEK293 cells. The observed molecular weight of the protein may vary from the listed predicted molecular weight due to post translational modifications, post translation cleavages, relative charges, and other experimental factors.
Formulation, Preparation, and Storage
Purification
Immunogen affinity purified
Formulation
Tris-Citrate/Phosphate (pH 7.0 - 8.0)
Format
BSA Free
Preservative
0.02% Sodium Azide
Concentration
1 mg/ml
Shipping
The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below.
Stability & Storage
Aliquot and store at -20C or -80C. Avoid freeze-thaw cycles.
Background: ABCG8
Alternate Names
ATP-binding cassette sub-family G member 8, ATP-binding cassette, sub-family G (WHITE), member 8, ATP-binding cassette, sub-family G (WHITE), member 8 (sterolin 2), GBD4ATP-binding cassette, subfamily G, member 8, MGC142217, sterolin 2, sterolin-2, STSL
Gene Symbol
ABCG8
Additional ABCG8 Products
Product Documents for ABCG8 Antibody - BSA Free
Certificate of Analysis
To download a Certificate of Analysis, please enter a lot or batch number in the search box below.
Product Specific Notices for ABCG8 Antibody - BSA Free
This product is for research use only and is not approved for use in humans or in clinical diagnosis. Primary Antibodies are guaranteed for 1 year from date of receipt.
Citations for ABCG8 Antibody - BSA Free
Customer Reviews for ABCG8 Antibody - BSA Free
There are currently no reviews for this product. Be the first to review ABCG8 Antibody - BSA Free and earn rewards!
Have you used ABCG8 Antibody - BSA Free?
Submit a review and receive an Amazon gift card!
$25/€18/£15/$25CAN/¥2500 Yen for a review with an image
$10/€7/£6/$10CAN/¥1110 Yen for a review without an image
Submit a review
Protocols
View specific protocols for ABCG8 Antibody - BSA Free (NB400-117):
ABCG8 Antibody:
Immunocytochemistry Protocol
Culture cells to appropriate density in 35 mm culture dishes or 6-well plates.
1. Remove culture medium and add 10% formalin to the dish. Fix at room temperature for 30 minutes.
2. Remove the formalin and add ice cold methanol. Incubate for 5-10 minutes.
3. Remove methanol and add washing solution (i.e. PBS). Be sure to not let the specimen dry out. Wash three times for 10 minutes.
4. To block nonspecific antibody binding incubate in 10% normal goat serum from 1 hour to overnight at room temperature.
5. Add primary antibody at appropriate dilution and incubate at room temperature from 2 hours to overnight at room temperature.
6. Remove primary antibody and replace with washing solution. Wash three times for 10 minutes.
7. Add secondary antibody at appropriate dilution. Incubate for 1 hour at room temperature.
8. Remove antibody and replace with wash solution, then wash for 10 minutes. Add Hoechst 33258 to wash solution at 1:25,0000 and incubate for 10 minutes. Wash a third time for 10 minutes.
9. Cells can be viewed directly after washing. The plates can also be stored in PBS containing Azide covered in Parafilm (TM). Cells can also be cover-slipped using Fluoromount, with appropriate sealing.
*The above information is only intended as a guide. The researcher should determine what protocol best meets their needs. Please follow safe laboratory procedures.
Immunocytochemistry Protocol
Culture cells to appropriate density in 35 mm culture dishes or 6-well plates.
1. Remove culture medium and add 10% formalin to the dish. Fix at room temperature for 30 minutes.
2. Remove the formalin and add ice cold methanol. Incubate for 5-10 minutes.
3. Remove methanol and add washing solution (i.e. PBS). Be sure to not let the specimen dry out. Wash three times for 10 minutes.
4. To block nonspecific antibody binding incubate in 10% normal goat serum from 1 hour to overnight at room temperature.
5. Add primary antibody at appropriate dilution and incubate at room temperature from 2 hours to overnight at room temperature.
6. Remove primary antibody and replace with washing solution. Wash three times for 10 minutes.
7. Add secondary antibody at appropriate dilution. Incubate for 1 hour at room temperature.
8. Remove antibody and replace with wash solution, then wash for 10 minutes. Add Hoechst 33258 to wash solution at 1:25,0000 and incubate for 10 minutes. Wash a third time for 10 minutes.
9. Cells can be viewed directly after washing. The plates can also be stored in PBS containing Azide covered in Parafilm (TM). Cells can also be cover-slipped using Fluoromount, with appropriate sealing.
*The above information is only intended as a guide. The researcher should determine what protocol best meets their needs. Please follow safe laboratory procedures.
ABCG8 Antibody:
Western Blot Protocol
1. Load ~50 micrograms of lysate (ie: liver membrane) onto an 8% SDS-PAGE, reducing.
2. Block the protein transferred membrane for 30 minutes in blocking buffer [5% NFDM, 10 mM Tris (pH 7.6) saline, 0.2% Tween-20] at room temperature.
3. Incubate the membrane in diluted primary anti-ABCG8 [cat# NB 400-117], 1:250 for 1 hour at room temperature.
4. Wash the membrane 3x 5 minutes in blocking buffer without milk.
5. Incubate the membrane in diluted secondary anti-Rabbit IgG conjugated to HRP.
6. Wash the membrane 3x 5 minutes in blocking buffer without milk.
7. Wash the membrane for 5 minutes in TBS.
8. Develop using West-Pico ECL reagent (Pierce).
Western Blot Protocol
1. Load ~50 micrograms of lysate (ie: liver membrane) onto an 8% SDS-PAGE, reducing.
2. Block the protein transferred membrane for 30 minutes in blocking buffer [5% NFDM, 10 mM Tris (pH 7.6) saline, 0.2% Tween-20] at room temperature.
3. Incubate the membrane in diluted primary anti-ABCG8 [cat# NB 400-117], 1:250 for 1 hour at room temperature.
4. Wash the membrane 3x 5 minutes in blocking buffer without milk.
5. Incubate the membrane in diluted secondary anti-Rabbit IgG conjugated to HRP.
6. Wash the membrane 3x 5 minutes in blocking buffer without milk.
7. Wash the membrane for 5 minutes in TBS.
8. Develop using West-Pico ECL reagent (Pierce).
Find general support by application which include: protocols, troubleshooting, illustrated assays, videos and webinars.
- Appropriate Fixation of IHC/ICC Samples
- Cellular Response to Hypoxia Protocols
- ClariTSA™ Fluorophore Kits
- Detection & Visualization of Antibody Binding
- ICC Cell Smear Protocol for Suspension Cells
- ICC Immunocytochemistry Protocol Videos
- ICC for Adherent Cells
- Immunocytochemistry (ICC) Protocol
- Immunocytochemistry Troubleshooting
- Immunofluorescence of Organoids Embedded in Cultrex Basement Membrane Extract
- Immunohistochemistry (IHC) and Immunocytochemistry (ICC) Protocols
- Preparing Samples for IHC/ICC Experiments
- Preventing Non-Specific Staining (Non-Specific Binding)
- Primary Antibody Selection & Optimization
- Protocol for VisUCyte™ HRP Polymer Detection Reagent
- Protocol for the Fluorescent ICC Staining of Cell Smears - Graphic
- Protocol for the Fluorescent ICC Staining of Cultured Cells on Coverslips - Graphic
- Protocol for the Preparation and Fluorescent ICC Staining of Cells on Coverslips
- Protocol for the Preparation and Fluorescent ICC Staining of Non-adherent Cells
- Protocol for the Preparation and Fluorescent ICC Staining of Stem Cells on Coverslips
- Protocol for the Preparation of a Cell Smear for Non-adherent Cell ICC - Graphic
- R&D Systems Quality Control Western Blot Protocol
- TUNEL and Active Caspase-3 Detection by IHC/ICC Protocol
- The Importance of IHC/ICC Controls
- Troubleshooting Guide: Western Blot Figures
- Western Blot Conditions
- Western Blot Protocol
- Western Blot Protocol for Cell Lysates
- Western Blot Troubleshooting
- Western Blot Troubleshooting Guide
- View all Protocols, Troubleshooting, Illustrated assays and Webinars
Loading...