Mouse CXCL2/MIP-2 Quantikine ELISA Kit

R&D Systems | Catalog # MM200

R&D Systems
Loading...

Key Product Details

Assay Length

4.5 hours

Sample Type & Volume Required Per Well

Cell Culture Supernates (50 µL), Serum (50 µL)

Sensitivity

1.5 pg/mL

Assay Range

7.8-500 pg/mL (Cell Culture Supernates, Serum)
Loading...

Product Summary for Mouse CXCL2/MIP-2 Quantikine ELISA Kit

The Quantikine Mouse MIP-2 Immunoassay is a 4.5 hour solid phase ELISA designed to measure mouse MIP-2 levels in cell culture supernates and serum. It contains E. coli-expressed recombinant mouse MIP-2 and antibodies raised against the recombinant factor. This immunoassay has been shown to quantitate the recombinant mouse MIP-2 accurately. Results obtained using natural mouse MIP-2 showed dose-response curves that were parallel to the standard curves obtained using the recombinant kit standards. These results indicate that this kit can be used to determine relative mass values for natural mouse MIP-2.

Product Specifications

Assay Type

Solid Phase Sandwich ELISA

Format

96-well strip plate

Measurement

Quantitative ELISA

Detection Method

Colorimetric - 450nm (TMB)

Conjugate

HRP

Species

Mouse

Specificity

Natural and recombinant mouse MIP-2

Cross-reactivity

< 0.5% cross-reactivity observed with available related molecules. Cross-species reactivity not tested.

Interference

No significant interference observed with available related molecules.

Precision

Intra-Assay Precision (Precision within an assay) Three samples of known concentration were tested on one plate to assess intra-assay precision.

Inter-Assay Precision (Precision between assays) Three samples of known concentration were tested in separate assays to assess inter-assay precision.

Cell Culture Supernates, Serum

Intra-Assay Precision Inter-Assay Precision
Sample 1 2 3 1 2 3
n 20 20 20 20 20 20
Mean (pg/mL) 17.7 53.9 363 16.9 52.1 346
Standard Deviation 0.5 1.3 7.3 1.0 2.3 15.4
CV% 2.8 2.4 2.0 5.9 4.4 4.5

Recovery for Mouse CXCL2/MIP-2 Quantikine ELISA Kit

The recovery of mouse MIP-2 spiked to three levels throughout the range of the assay in various matrices was evaluated.

Sample Type Average % Recovery Range %
Cell Culture Supernates (n=10) 96 84-110
Serum (n=14) 100 94-116

Linearity

To assess the linearity of the assay, five or more samples containing and/or spiked with various concentrations of mouse MIP-2 in each matrix were diluted with Calibrator Diluent and then assayed.

Mouse CXCL2/GRO beta/MIP-2/CINC-3 ELISA Linearity

Scientific Data Images for Mouse CXCL2/MIP-2 Quantikine ELISA Kit

Mouse CXCL2/GRO beta/MIP-2/CINC-3 ELISA Standard Curve

Mouse CXCL2/GRO beta/MIP-2/CINC-3 ELISA Standard Curve

Preparation and Storage

Shipping

The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below.

Stability & Storage

Store the unopened product at 2 - 8 °C. Do not use past expiration date.

Background: CXCL2/GRO beta/MIP-2/CINC-3

CXCL2/GRO beta, also called MIP-2 in mouse and CINC-3 in rat, is a member of the CXC chemokine family. Human CXCL2/GRO beta is 107 amino acids (aa) in length with a predicted molecular weight of 11 kDa. The mouse and rat orthologs share 70% and 71% aa sequence identity with the human protein, respectively. N-terminal aa 1-4 of CXCL2/GRO beta can be post-translationally cleaved which confers enhanced hematopoietic bioactivity. CXCL2/GRO beta is produced by a variety of cell types including monocytes and macrophages at sites of inflammation and is chemotactic for granulocytes, including neutrophils.

Alternate Names

CINC-3, CINC3, GRO beta, MGSA-beta, MIP-2

Entrez Gene IDs

2920 (Human); 20310 (Mouse); 114105 (Rat)

Gene Symbol

CXCL2

Additional CXCL2/GRO beta/MIP-2/CINC-3 Products

Product Documents for Mouse CXCL2/MIP-2 Quantikine ELISA Kit

Certificate of Analysis

To download a Certificate of Analysis, please enter a lot or batch number in the search box below.

Note: Certificate of Analysis not available for kit components.

Product Specific Notices for Mouse CXCL2/MIP-2 Quantikine ELISA Kit

For research use only

⚠ WARNING: This product can expose you to chemicals including N,N-Dimethylforamide, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Citations for Mouse CXCL2/MIP-2 Quantikine ELISA Kit

Customer Reviews for Mouse CXCL2/MIP-2 Quantikine ELISA Kit (2)

5 out of 5
2 Customer Ratings
5 Stars
100%
4 Stars
0%
3 Stars
0%
2 Stars
0%
1 Stars
0%

Have you used Mouse CXCL2/MIP-2 Quantikine ELISA Kit?

Submit a review and receive an Amazon gift card!

$25/€18/£15/$25CAN/¥2500 Yen for a review with an image

$10/€7/£6/$10CAN/¥1110 Yen for a review without an image

Submit a review
Amazon Gift Card

Customer Images


Showing  1 - 2 of 2 reviews Showing All
Filter By:
  • Mouse CXCL2/MIP-2 Quantikine ELISA Kit
    Name: Jim Hsiao
    Sample Tested: Mouse lung BALF
    Verified Customer | Posted 12/04/2017
    Result has been published in 10.1371/journal.pone.0058258
    Mouse CXCL2/MIP-2 Quantikine ELISA Kit MM200
  • Mouse CXCL2/MIP-2 Quantikine ELISA Kit
    Name: Jun Xie
    Sample Tested: Lung tissue
    Verified Customer | Posted 08/04/2017

There are no reviews that match your criteria.

Showing  1 - 2 of 2 reviews Showing All

Protocols

View specific protocols for Mouse CXCL2/MIP-2 Quantikine ELISA Kit (MM200):

Refer to the product for complete assay procedure.

Bring all reagents and samples to room temperature before use. It is recommended that all samples, standards, and controls be assayed in duplicate.
  1.   Prepare all reagents, standard dilutions, and samples as directed in the product insert.
  2.   Remove excess microplate strips from the plate frame, return them to the foil pouch containing the desiccant pack, and reseal.

  3. 50 µL Assay Diluent
  4.   Add 50 µL of Assay Diluent to each well.

  5. 50 µL Standard, Control, or Sample
  6.   Add 50 µL of Standard, Control, or sample to each well. Cover with a plate sealer, and incubate at room temperature for 2 hours.
  7.   Aspirate each well and wash, repeating the process 4 times for a total of 5 washes.

  8. 100 µL Conjugate
  9.   Add 100 µL of Conjugate to each well. Cover with a new plate sealer, and incubate at room temperature for 2 hours.
  10.   Aspirate and wash 5 times.

  11. 100 µL Substrate Solution
  12.   Add 100 µL Substrate Solution to each well. Incubate at room temperature for 30 minutes. PROTECT FROM LIGHT.

  13. 100 µL Stop Solution
  14.   Add 100 µL of Stop Solution to each well. Read at 450 nm within 30 minutes. Set wavelength correction to 540 nm or 570 nm.

Find general support by application which include: protocols, troubleshooting, illustrated assays, videos and webinars.

FAQs

No product specific FAQs exist for this product.

View all FAQs for ELISA Kits