Recombinant Human AKT1 His Protein

Novus Biologicals | Catalog # NBP2-52121

Novus Biologicals
100% Guarantee

Key Product Details

Source

Baculovirus

Tag

His

Applications

Functional Assay, SDS-PAGE
View all Akt1 Proteins and Enzymes »

Product Specifications

Description

A recombinant protein with a C-Terminal His-tag and corresponding to the amino acids 1-480 of Human AKT1

Source: Baculovirus

Amino Acid Sequence: MSDVAIVKEG WLHKRGEYIK TWRPRYFLLK NDGTFIGYKE RPQDVDQREA PLNNFSVAQC QLMKTERPRP NTFIIRCLQW TTVIERTFHV ETPEEREEWT TAIQTVADGL KKQEEEEMDF RSGSPSDNSG AEEMEVSLAK PKHRVTMNEF EYLKLLGKGT FGKVILVKEK ATGRYYAMKI LKKEVIVAKD EVAHTLTENR VLQNSRHPFL TALKYSFQTH DRLCFVMEYA NGGELFFHLS RERVFSEDRA RFYGAEIVSA LDYLHSEKNV VYRDLKLENL MLDKDGHIKI TDFGLCKEGI KDGATMKTFC GTPEYLAPEV LEDNDYGRAV DWWGLGVVMY EMMCGRLPFY NQDHEKLFEL ILMEEIRFPR TLGPEAKSLL SGLLKKDPKQ RLGGGSEDAK EIMQHRFFAG IVWQHVYEKK LSPPFKPQVT SETDTRYFDE EFTAQMITIT PPDQDDSMEC VDSERRPHFP QFSYSASGTA LEHHHHHH

Purity

>90%, by SDS-PAGE

Endotoxin Level

< 1.0 EU per 1 microgram of protein (determined by LAL method)

Predicted Molecular Mass

56.7 kDa.
Disclaimer note: The observed molecular weight of the protein may vary from the listed predicted molecular weight due to post translational modifications, post translation cleavages, relative charges, and other experimental factors.

Application Notes

Use in In vitro reported in scientific literature (PMID:33148467).

Protein / Peptide Type

Recombinant Protein

Scientific Data Images for Recombinant Human AKT1 His Protein

SDS-PAGE: Recombinant Human AKT1 His Protein [NBP2-52121]

SDS-PAGE: Recombinant Human AKT1 His Protein [NBP2-52121]

SDS-Page: Recombinant Human AKT1 Protein [NBP2-52121] - 3ug by SDS-PAGE under reducing condition and visualized by coomassie blue stain

Formulation, Preparation, and Storage

NBP2-52121
Formulation PBS (pH 7.4), 20% glycerol
Preservative No Preservative
Concentration 0.5 mg/ml
Shipping The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below.
Stability & Storage Store at 4C short term. Aliquot and store at -20C long term. Avoid freeze-thaw cycles.

Background: Akt1

AKT (also known as protein kinase B (PKB) and RAC (related to A and C kinases)) is a critical intracellular serine/threonine kinase that translates signals from extracellular stimuli including growth factors, cytokines and neurotransmitters (1). AKT signaling plays critical roles in cell growth, proliferation, survival and differentiation (1). It is also involved in organogenesis, angiogenesis and metabolism. Three mammalian AKT isoforms have been identified. The AKT pathway can be activated by any of the three members who share a high level of protein homology but are independently encoded by AKT1 (PKB alpha; 14q32.32), AKT2 (PKB beta; 19q13.2), or AKT3 (PKB gamma; 1q44) (1, 2). Each AKT family member contains an N-terminal pleckstrin homology (PH) domain, a central kinase domain, and a C-terminal regulatory domain. AKT mediates many of the downstream events of phosphatidylinositol 3-kinase (PI3-K), a lipid kinase activated by growth factors, cytokines and insulin. PI3-K recruits AKT to the membrane, where it is activated by PDK1 phosphorylation. AKT has two main phosphorylation sites (Ser473 and Thr308, predicted molecular weight 56 kDa) (3, 4). Once phosphorylated, AKT dissociates from the membrane and phosphorylates targets in the cytoplasm and the cell nucleus including mammalian target of rapamycin (mTOR).

The main function of AKT is to control inhibition of apoptosis and promote cell proliferation. Survival factors can activate AKT Ser473 and Thr308 phosphorylation sites in a transcription-independent manner, resulting in the inactivation of apoptotic signaling transduction through the tumor suppressor PTEN, an antagonist to PI3-K (5). PTEN exerts enzymatic activity as a phosphatidylinositol-3,4,5-trisphosphate (PIP3) phosphatase, opposing PI3K activity by decreasing availability of PIP3 to proliferating cells, leading to overexpression and inappropriate activation of AKT noted in many types of cancer.

AKT1 function has been linked to overall physiological growth and function (2). AKT1 has been correlated with proteus syndrome, a rare disorder characterized by overgrowth of various tissues caused by a mosaic variant in the AKT1 gene in humans.

AKT2 is strongly correlated with Type II diabetes, including phenotypes of insulin resistance, hyperglycemia and atherosclerosis (2, 6).

The function of AKT3 is specifically associated to brain development, where disruptions to AKT3 are correlated with microcephaly, hemimegalencephaly, megalencephaly and intellectual disabilities (2).

References

1. Ersahin, T., Tuncbag, N., & Cetin-Atalay, R. (2015). The PI3K/AKT/mTOR interactive pathway. Mol Biosyst, 11(7), 1946-1954. doi:10.1039/c5mb00101c

2. Cohen, M. M., Jr. (2013). The AKT genes and their roles in various disorders. Am J Med Genet A, 161a(12), 2931-2937. doi:10.1002/ajmg.a.36101

3. Georgescu, M. M. (2010). PTEN Tumor Suppressor Network in PI3K-Akt Pathway Control. Genes Cancer, 1(12), 1170-1177. doi:10.1177/1947601911407325

4. Mishra, P., Paital, B., Jena, S., Swain, S. S., Kumar, S., Yadav, M. K.,... Samanta, L. (2019). Possible activation of NRF2 by Vitamin E/Curcumin against altered thyroid hormone induced oxidative stress via NFkB/AKT/mTOR/KEAP1 signalling in rat heart. Sci Rep, 9(1), 7408. doi:10.1038/s41598-019-43320-5

5. Wedel, S., Hudak, L., Seibel, J. M., Juengel, E., Oppermann, E., Haferkamp, A., & Blaheta, R. A. (2011). Critical analysis of simultaneous blockage of histone deacetylase and multiple receptor tyrosine kinase in the treatment of prostate cancer. Prostate, 71(7), 722-735. doi:10.1002/pros.21288

6. Rotllan, N., Chamorro-Jorganes, A., Araldi, E., Wanschel, A. C., Aryal, B., Aranda, J. F.,... Fernandez-Hernando, C. (2015). Hematopoietic Akt2 deficiency attenuates the progression of atherosclerosis. Faseb j, 29(2), 597-610. doi:10.1096/fj.14-262097

Long Name

v-Akt Murine Thymoma Viral Oncogene Homolog 1

Alternate Names

PKB alpha, PRKBA, RAC-alpha

Gene Symbol

AKT1

Additional Akt1 Products

Product Documents for Recombinant Human AKT1 His Protein

Certificate of Analysis

To download a Certificate of Analysis, please enter a lot or batch number in the search box below.

Product Specific Notices for Recombinant Human AKT1 His Protein

This product is for research use only and is not approved for use in humans or in clinical diagnosis. This product is guaranteed for 1 year from date of receipt.

Citations for Recombinant Human AKT1 His Protein

Customer Reviews for Recombinant Human AKT1 His Protein

There are currently no reviews for this product. Be the first to review Recombinant Human AKT1 His Protein and earn rewards!

Have you used Recombinant Human AKT1 His Protein?

Submit a review and receive an Amazon gift card!

$25/€18/£15/$25CAN/¥2500 Yen for a review with an image

$10/€7/£6/$10CAN/¥1110 Yen for a review without an image

Submit a review
Amazon Gift Card

FAQs for Recombinant Human AKT1 His Protein

Showing  1 - 5 of 5 FAQs Showing All

  • Q: Do your HRP-conjugated antibodies contain sodium azide?

    A: No. None of our HRP-conjugated antibodies contain sodium azide as this agent inhibits the activity of HRP.

  • Q: How do I choose secondary antibodies to label the same cells when I have two primary antibodies from the same host?

    A: Use isotype-specific secondary antibodies if the primary antibodies are of different isotypes. You can also make direct conjugates of the primary antibodies by use of antibody labeling kits, dyes, or custom conjugations (please contact Technical Support for custom orders).

  • Q: I am looking for a antibody that recognizes human Akt1 but NOT Akt2 or 3, for Western blot analyses. I also want that antibody to recognize Akt1 regardless of its phosphorylated form.

    A: At the moment we do not have an AKT1 antibody that definitively does not react with either AKT2 or AKT3.

  • Q: What is the molecular weight of your antibodies?

    A: All IgG antibodies are approximately 150 kDa (each heavy chain is about 50 kDa and each light chain is about 25 kDa).

  • Q: Why are many of your antibodies formulated with sodium azide and BSA?

    A: Sodium azide is a preservative which is added to prevent bacterial growth. BSA is added as a protein stabilizer.

  • Q: Do your HRP-conjugated antibodies contain sodium azide?

    A: No. None of our HRP-conjugated antibodies contain sodium azide as this agent inhibits the activity of HRP.

  • Q: How do I choose secondary antibodies to label the same cells when I have two primary antibodies from the same host?

    A: Use isotype-specific secondary antibodies if the primary antibodies are of different isotypes. You can also make direct conjugates of the primary antibodies by use of antibody labeling kits, dyes, or custom conjugations (please contact Technical Support for custom orders).

  • Q: I am looking for a antibody that recognizes human Akt1 but NOT Akt2 or 3, for Western blot analyses. I also want that antibody to recognize Akt1 regardless of its phosphorylated form.

    A: At the moment we do not have an AKT1 antibody that definitively does not react with either AKT2 or AKT3.

  • Q: What is the molecular weight of your antibodies?

    A: All IgG antibodies are approximately 150 kDa (each heavy chain is about 50 kDa and each light chain is about 25 kDa).

  • Q: Why are many of your antibodies formulated with sodium azide and BSA?

    A: Sodium azide is a preservative which is added to prevent bacterial growth. BSA is added as a protein stabilizer.

  • Q: Do your HRP-conjugated antibodies contain sodium azide?

    A: No. None of our HRP-conjugated antibodies contain sodium azide as this agent inhibits the activity of HRP.

  • Q: How do I choose secondary antibodies to label the same cells when I have two primary antibodies from the same host?

    A: Use isotype-specific secondary antibodies if the primary antibodies are of different isotypes. You can also make direct conjugates of the primary antibodies by use of antibody labeling kits, dyes, or custom conjugations (please contact Technical Support for custom orders).

  • Q: I am looking for a antibody that recognizes human Akt1 but NOT Akt2 or 3, for Western blot analyses. I also want that antibody to recognize Akt1 regardless of its phosphorylated form.

    A: At the moment we do not have an AKT1 antibody that definitively does not react with either AKT2 or AKT3.

  • Q: What is the molecular weight of your antibodies?

    A: All IgG antibodies are approximately 150 kDa (each heavy chain is about 50 kDa and each light chain is about 25 kDa).

  • Q: Why are many of your antibodies formulated with sodium azide and BSA?

    A: Sodium azide is a preservative which is added to prevent bacterial growth. BSA is added as a protein stabilizer.

  • Q: Do your HRP-conjugated antibodies contain sodium azide?

    A: No. None of our HRP-conjugated antibodies contain sodium azide as this agent inhibits the activity of HRP.

  • Q: How do I choose secondary antibodies to label the same cells when I have two primary antibodies from the same host?

    A: Use isotype-specific secondary antibodies if the primary antibodies are of different isotypes. You can also make direct conjugates of the primary antibodies by use of antibody labeling kits, dyes, or custom conjugations (please contact Technical Support for custom orders).

  • Q: I am looking for a antibody that recognizes human Akt1 but NOT Akt2 or 3, for Western blot analyses. I also want that antibody to recognize Akt1 regardless of its phosphorylated form.

    A: At the moment we do not have an AKT1 antibody that definitively does not react with either AKT2 or AKT3.

  • Q: What is the molecular weight of your antibodies?

    A: All IgG antibodies are approximately 150 kDa (each heavy chain is about 50 kDa and each light chain is about 25 kDa).

  • Q: Why are many of your antibodies formulated with sodium azide and BSA?

    A: Sodium azide is a preservative which is added to prevent bacterial growth. BSA is added as a protein stabilizer.

  • Q: Do your HRP-conjugated antibodies contain sodium azide?

    A: No. None of our HRP-conjugated antibodies contain sodium azide as this agent inhibits the activity of HRP.

  • Q: How do I choose secondary antibodies to label the same cells when I have two primary antibodies from the same host?

    A: Use isotype-specific secondary antibodies if the primary antibodies are of different isotypes. You can also make direct conjugates of the primary antibodies by use of antibody labeling kits, dyes, or custom conjugations (please contact Technical Support for custom orders).

  • Q: I am looking for a antibody that recognizes human Akt1 but NOT Akt2 or 3, for Western blot analyses. I also want that antibody to recognize Akt1 regardless of its phosphorylated form.

    A: At the moment we do not have an AKT1 antibody that definitively does not react with either AKT2 or AKT3.

  • Q: What is the molecular weight of your antibodies?

    A: All IgG antibodies are approximately 150 kDa (each heavy chain is about 50 kDa and each light chain is about 25 kDa).

  • Q: Why are many of your antibodies formulated with sodium azide and BSA?

    A: Sodium azide is a preservative which is added to prevent bacterial growth. BSA is added as a protein stabilizer.

Showing  1 - 5 of 5 FAQs Showing All
View all FAQs for Proteins and Enzymes